koevoet Posted July 14, 2006 Report Share Posted July 14, 2006 Help...further to my last post I have got a set of raceline dimpled clutch plates.I removed the original plates and fitted the new ones but now the clutch drags all the time! it will free wheel in neutral but with the clutch lever pulled in it will not free wheel if in gear.What have I done wrong? I think (pretty sure ) that the plates came out and went back in in the same order only with dimpled steel plates instead of the old ones?!HELP never done this before and thought that it would be straight forward enough! (to quote,"a ten minute job"). Quote Link to comment Share on other sites More sharing options...
subira Posted July 14, 2006 Report Share Posted July 14, 2006 I ran an 04 with 3 dimpled and 3 plain plates (if I remember the numbers right). As the 'pack' wouldn't disengage with all the dimpled plates in - they are too fat, so drop some out and stick a couple of std ones back in. 315 Clutch is so over engineered this will not cause any problems. What oil are you using ? The best clutch I could get was using elf htx, tried ATF, Clutch Tuner, etc and never managed to get it as slick as with elf. Quote Link to comment Share on other sites More sharing options...
koevoet Posted July 14, 2006 Author Report Share Posted July 14, 2006 Thanks for that,did you have any issues withdrag with some of the old plates back in.I took 6 steels out and put back 5 dimpled and one std,I am using PJ1 oil. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.