lms 6201 Posted August 6, 2006 Report Share Posted August 6, 2006 hi all ,i have recently bought a 1974 sherpa t ,i have fitted ebc shoes and the result is marginally better than no shoes in it at all , it has nickel drums , would someone know if possibily i have to machine off the chrome and mabey fit a steel liner to get them to work , or any other suggestions ? thanks in advance , steve Quote Link to comment Share on other sites More sharing options...
arun1664 Posted August 6, 2006 Report Share Posted August 6, 2006 Bultaco UK do an exchange hub for Quote Link to comment Share on other sites More sharing options...
cleanorbust Posted August 7, 2006 Report Share Posted August 7, 2006 As a general tip, it's worthwhile chamfering the leading edge of the brake shoe lining to ensure proper contact with the drum Quote Link to comment Share on other sites More sharing options...
nigel dabster Posted August 7, 2006 Report Share Posted August 7, 2006 make sure the arms are the long ones and the cables are tip top and a rod for the rear is the only way. Quote Link to comment Share on other sites More sharing options...
woody Posted August 7, 2006 Report Share Posted August 7, 2006 (edited) and a rod for the rear is the only way. I'd change your diet and see a doctor before taking that advice....... Edited August 7, 2006 by Woody Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.